Shallow Channel Drains with Plastic Grate. (106 x50 x1000 mm)

When installation depths are limited, this shallow channel drain with plastic crate is designed to drain surface water efficiently. Designed from durable, high-quality materials, this drainage channel helps prevent the accumulation of water on surfaces by providing reliable water flow.

Integrated plastic crates/gratings allow water to pass through without allowing debris or solid particles to pass through. Its lightweight but strong construction makes installation quick and convenient for various residential, commercial, and landscape drainage applications.

Material: 100% recycled polypropylene
Color: Black
Weight: 800g
Load Rating: EN1433 – A15
Temperature Stability: -10°c+90°c
Outlet: Connects to 101mm pipe
Dimensions: 1000mm (L) × 106mm (W) × 60mm (H)

Shallow Chanel Drain Accessories Pack:
» End cap
» End cap with outflow
» Outlet connector

1m Shallow Channel Drain with Plastic Grate (106 x 50mm): key details

This interlocking channel drain collects surface water from hard landscaping and carries it to your drainage system, stopping puddles and protecting walls and doorways from standing water. Lengths join end to end, so you can build a run to suit your space.

Where to use it

Rated EN Class A15, it is designed for patios, garden paths, courtyards and the edges of paved areas used by pedestrians. For driveways and vehicle areas, use a channel rated B125 or higher.

How to install a channel drain

1. Plan the run and the outlet point, and give the run a slight fall towards the outlet.
2. Dig a trench about 100mm wider and 100mm deeper than the channel.
3. Lay a concrete bed, set the channels on it and connect the outlet to your drainage pipe.
4. Haunch concrete along both sides, then lay the paving so it finishes 3–5mm above the grate.
5. Leave the grates in place while you work so the channels keep their shape.

Frequently asked questions

Can I drive over this channel drain?
No. Class A15 is for pedestrian areas only. Driveways need B125 or higher.

How do I connect it to the drain?
Use a TITAN outlet connector, outlet end cap or inspection box at the low point of the run and connect it to your underground pipe or soakaway.

How many do I need?
Measure the length you want to drain and divide by the channel length (1m). Add end caps, corners and an outlet to finish the run.