Welcome to Our Marketplace

Aluminium Alloy Manhole Covers – 300 mm (L) × 300 mm (W) × 60 mm (H)

£41.33 (Exc. 20% VAT)(£49.60 Inc. VAT)Free Delivery

Free Delivery

300 x 300mm aluminium recessed manhole cover with 60mm tray for patio slabs & tiles. 2 tonne rated. Lightweight, rust-free, 2.5 kg. UK delivery.

37 in stock

The TD-M Aluminium Alloy TD-M-30x30x6-AA manhole cover is a specialized aluminum alloy product designed for durability, lightweight handling, and corrosion resistance. Typically made from an aluminum alloy such as 6063, this type of manhole cover is suited for architectural and infrastructure applications due to its good surface finish, high corrosion resistance, and ability to be anodized or powder-coated for enhanced protection.

  • Material: Aluminum
  • Color: Silver
  • Weight: 2.5 kg
  • Temperature Range: -30°C to 90°C
  • Load Capacity: 2 tons
  • Dimensions: 300 mm (L) × 300 mm (W) × 60 mm (H)

300 x 300 x 60mm Aluminium Recessed Manhole Cover: key details

This 300 x 300mm recessed manhole cover is made from aluminium alloy with a 60mm deep tray, so you can fill it with patio slabs, tiles or screed and make the cover blend into the floor around it. Aluminium is light to lift, does not rust and will not stain the paving around it.

Size (L x W x H) 300 x 300 x 60mm
Material aluminium alloy
Recess depth 60mm
Weight 2.5 kg
Load rating 2 tonne load capacity (manufacturer rating)
Infill patio slabs, tiles or screed

Where to use it

The manufacturer rates this cover at 2 tonnes. It suits patios, paths, gardens and indoor floors. It does not carry an EN124 B125 rating, so for driveways and areas with vehicle traffic choose a cover tested to B125 or above.

How to fit a recessed manhole cover

  1. Check the cover and frame size against your chamber opening before you start.
  2. Bed the frame on a full bed of mortar so its top edge sits flush with the finished surface, and check it is level in both directions.
  3. Lift the tray out and fill it with patio slabs, tiles or screed, bedded on mortar or screed so the infill sits flush with the frame.
  4. Grout or point the joints to match the surrounding surface, keeping the lifting points clear.
  5. Let the mortar cure fully before the cover is walked on.

Frequently asked questions

What size manhole cover do I need?
Measure the opening of your inspection chamber and compare it with the 300 x 300mm size above. The frame needs a solid bed of mortar all round, so check there is room for it on the chamber walls.

Can I drive over this manhole cover?
It is not rated to EN124 B125, which is what most driveways need. Use a B125-rated cover or higher wherever vehicles will cross it.

What can I put in a 60mm recessed tray?
The 60mm tray suits patio slabs, tiles or screed. Allow for the bedding layer under the infill so it finishes flush with the frame.

Is an aluminium cover strong enough for a patio?
Yes, for pedestrian use. Aluminium also keeps the tray light enough to lift without special tools.

Reviews

There are no reviews yet.

Be the first to review “Aluminium Alloy Manhole Covers – 300 mm (L) × 300 mm (W) × 60 mm (H)”

Your email address will not be published. Required fields are marked *

SKU: TD-M-30x30x6-AA Categories: , ,
✉ Unit West 1, Hambro Nurseries, Chelmsford Road, Rawreth, Essex SS11 8SY

Your Cart

Your Cart

Your Cart is Empty

Start Shopping
Continue Shopping
Payment Details
Sub Total £0.00